Cart 0
Buyers-SALTDOGG-1400050-2.0 Cubic Yard Gas Painted Orange Steel Hopper Spreader, (product_type), (product_vendor) - Nick's Truck Parts

Buyers-SALTDOGG-1400050-2.0 Cubic Yard Gas Painted Orange Steel Hopper Spreader

$ 4,258.80

SALTDOGG 1400050 - 2.0 Cubic Yard Gas Painted Orange Steel Hopper Spreader

Designed for 1 ton trucks. 96 in. hopper with a 2.0 cubic yard capacity.
10-1/2 HP gas engine with convenient electric start and throttle control.
Spreads bulk salt or a salt/sand mix.
Versatile 12 in. chain conveyor drive.
12 in. poly spinner broadcasts up to 30 ft.
Corrosion-resistant orange powder-coated carbon steel construction.
Top screen and inverted V included.
Made in the USA.

Buyers Products SALTDOGG 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 8 ft hopper can fit in an extended-bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.
A SALTDOGG spreader is an investment made to last. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.The bright orange carbon steel hopper is dual powder-coated for optimum corrosion protection. The frame is continuously welded for strength and durability. The hopper also comes outfitted with a top screen. The spreader is equipped with a steel pintle chain conveyor, and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.
Its 12 in. poly spinner casts material 2 ft to 30 ft and gets the job done. The spreader is equipped with an extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use. Buyers Products 2 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.

Product Common Use: Light Commercial Jobs, Residential Units/Apartment Complexes, Driveways, Parking Lots

Chute Primary Material = Carbon Steel
ChuteStandardAdjustableExtended =Standard
Controller Type = In-Cab Throttle/Choke
Discharge Position: Center
Drive Type = Gas
Hopper Color = Orange
Hopper Finish = Powder Coat
Hopper Length = 96.00"
Hopper Material = Carbon Steel
Number Of Motors = 1
Spinner Material = Polyurethane
Works With Bagged #1 Rock Salt = Yes
Works With Bulk Salt = Yes
Works With Bulk Sand = Yes
Works With Salt/Sand Mix = Yes
Capacity = 2.00 yd
Overall Height = 32.10"
Overall Length = 115.70"
Overall Width (At Top) = 47.00"
Hopper Width = 47.00"
Top Screen = Yes
Drive Motor Horse Power = 10.50 HP
Vibrator Included? = No
Spinner Diameter = 12.00"
Spreading Width Range = 2 To 30 Feet
Gearbox Ratio = 20:1
System Voltage = 12 VDC
Feed Mechanism = Conveyor Chain
Feed Mechanism2 = 12 in. Pintle Chain Conveyor



  • MANUAL INSTRUCTION: https://pimimages.buyersproducts.com/products/Documents/3008005_C.pdf
  • Wiring Diagram for SaltDogg Gas Spreaders: https://pimimages.buyersproducts.com/products/Documents/wiring_diagram_gas_spreader.pdf

Share this Product

More from this collection