Items are drop shipped from the manufacturer, in some cases, parts may not be available. We will do our best to obtain all the parts needed, however, if unsuccessful, we will follow up with you.
Cart 0
Buyers-SALTDOGG-1400350SS-Gas Hopper Spreader with  Extended Chute, (product_type), (product_vendor) - Nick's Truck Parts

Buyers-SALTDOGG-1400350SS-Gas Hopper Spreader with Extended Chute

$ 7,013.88

SALTDOGG 1400350SS 2.5 Cubic Yard Gas Stainless Hopper Spreader w/ Extended Chute

Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW.
120 in. hopper with a capacity of 2.5 cubic yards.
10-1/2 HP gas engine with convenient electric start and throttle control.
Spreads bulk salt, bulk sand, or a salt/sand mix.
Versatile 12 in. chain conveyor drive.
12 in. poly spinner broadcasts up to 30 ft, using an extended chute.
In-cab controls with independent variable speeds for the conveyor and spinner.
High quality, 304 stainless steel construction for optimum corrosion resistance.
Stainless steel inverted V improves flow and reduces stress on the drive line.
Top screen included.
Extended chute
Made in the USA.

Buyers Products SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand mix. Its 10 ft hopper fits an extended bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences.
The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle. It's powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.
The hopper, which comes with a top screen and fully welded frame, is made from high quality 304 stainless steel for long lasting corrosion protection. It's equipped with a steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 12 in. wide with a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.
A 12 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use.
The SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.

Product Common Use: Residential & Commercial Spreading, Property Maintenance, Parking Lots, Driveways

Chute Primary Material = 304 Stainless Steel
ChuteStandardAdjustableExtended = Extended
Controller Type = In-Cab Throttle/Choke
Drive Type = Gas
Hopper Length = 120.00"
Hopper Material = 304 Stainless Steel
Number Of Motors = 1
Spinner Material = Polyurethane
Works With Bagged #1 Rock Salt = Yes
Works With Bulk Salt = Yes
Works With Bulk Sand = Yes
Works With Salt/Sand Mix = Yes
Capacity = 2.50 yd³
Overall Height = 32.10"
Overall Length = 139.70"
Overall Width (At Top) = 47.00"
Hopper Width = 47.00"
Top Screen = Yes
Drive Motor Horse Power = 10.50 HP
Vibrator Included? = No
Spinner Diameter = 12.00"
Spreading Width Range = 2 To 30 Feet
Gearbox Ratio = 20:1
System Voltage = 12 VDC
Feed Mechanism = Conveyor Chain
Feed Mechanism2 = 12 in. Pintle Chain Conveyor


Wiring Diagram for SaltDogg Gas Spreaders:

Share this Product

More from this collection