Cart 0
Buyers-SALTDOGG-1400460SS-2.75 Cubic Yard Gas Engine Stainless Steel Mid-Size Hopper Spreader, (product_type), (product_vendor) - Nick's Truck Parts

Buyers-SALTDOGG-1400460SS-2.75 Cubic Yard Gas Engine Stainless Steel Mid-Size Hopper Spreader

$ 5,505.00

SALTDOGG 1400460SS - 2.75 Cubic Yard Gas Engine Stainless Steel Mid-Size Hopper Spreader

Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW. Available with 96 in., 108 in., or 120 in. hoppers with a capacity from 2.5 to 3 cubic yards.
10-1/2 HP gas engine with convenient electric start and throttle control
Spreads bulk salt, bulk sand, or a salt/sand mix.
Versatile 14-1/2 in. chain conveyor drive with 1/4 in. crossbars.
18 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
Two chute baffles allow you to adjust the spread pattern to your application.
High quality, 304 stainless steel construction for optimum corrosion resistance.
Stainless steel inverted V improves flow and reduces stress on the drive line.
Two hinged top screens with 1/4 in. bars included.
Made in the USA.

Buyers Products SALTDOGG 3.0 Cubic Yard Gas Conveyor Chain Spreader gives contractors and municipalities a gas-powered spreader ready for commercial use. The 118.6 in. hopper is designed for dump bodies and flatbeds with a minimum 13,000 lb GVW chassis. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences.
Buyers Products sets the standard for what you should expect from your spreader company. The spreader comes equipped with a 12V electric clutch and an in-cab, 3 position momentary switch and throttle. It also comes outfitted with four hinged-top screens with 1/4 in. bars. The hopper also comes outfitted with a top screen.
The hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with an included battery for electric start. A heavy duty 1-1/4 in. drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. The spreader is equipped with a steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 14-1/2 in. wide with 1/4 in. crossbars, and has a stainless steel floor. An adjustable feedgate with lock pin offers additional material flow control.
An 18 in. poly spinner casts material 2 ft to 30 ft and gets the job done. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

Product Common Use: Property Maintenance, Residential Commercial, Parking Lots, Sidewalks

Chute Primary Material = 304 Stainless Steel
ChuteStandardAdjustableExtended = Standard
Controller Type = In-Cab Throttle/Choke
Drive Type = Gas
Hopper Length = 108.00"
Hopper Material = 304 Stainless Steel
Number Of Motors = 1
Spinner Material = Polyurethane
Works With Bagged #1 Rock Salt = Yes
Works With Bulk Salt = Yes
Works With Bulk Sand = Yes
Works With Salt/Sand Mix = Yes
Capacity = 2.75 yd
Overall Height = 38.00"
Overall Length = 127.90"
Overall Width (At Top) = 58.00"
Hopper Width = 58.00"
Top Screen = Yes
Drive Motor Horse Power = 10.50 HP
Vibrator Included? = No
Spinner Diameter = 18.00"
Spreading Width Range = 2 To 30 Feet
Gearbox Ratio = 20:1
System Voltage = 12 VDC
Feed Mechanism = Conveyor Chain
Feed Mechanism2 = 14-1/2 in. Pintle Chain with 1/4in. Bars


Wiring Diagram for SaltDogg Gas Spreaders:

Share this Product

More from this collection