1400801SS- Buyers SaltDogg Spreader 7FT 1.8 CU YD
1400801SS- Buyers SaltDogg SPREADER 7FT 1.8 CU YD 304SST ELEC CHAIN ADJ CHUTE
DESCRIPTION
Buyers Products SaltDogg Electric Stainless Hopper Spreader is ready for commercial use. The 8 ft spreader can fit in the back of an extended-bed 1 ton truck and will work with bulk salt or a 50/50 salt/sand mix. Its electric-powered design means quieter operation with no need for refueling or engine servicing.
The hopper and fully-welded frame are made from long lasting, corrosion resistant 304 stainless steel. A 12 in. wide, all steel pintle chain conveyor provides high speed material flow with its independent 3/4 HP, 12V gear motor.
A lever-operated feedgate offers additional material flow control. A six-fin, 14 in. poly spinner powered by an independent 1/2 HP, 12V motor can cast material 5-30 ft. The stainless steel chute can be extended an extra 11-1/2 in. if needed.
The spreader is operated by an intuitive heavy duty in-cab controller with independent spinner and conveyor speeds. The spreader also comes outfitted with a top screen, stainless steel inverted V, and tie down kit.
Product Common Use: Residential & Commercial Spreading, Property Maintenance, Parking Lots, Driveways
DESCRIPTION
Capacity: 1.70 yd
Chute Primary Material: 304 Stainless Steel
ChuteStandardAdjustableExtended: Adjustable Height
Controller Type: High Current Variable Speed
Drive Motor Horse Power: 0.75 HP
Feed Mechanism: Conveyor chain
Feed Mechanism2: 12 in Pintle Chain Conveyor
Gearbox Ratio: 20:1
Hopper Material: 304 Stainless Steel
Number of Motors: 2
Overall Length: 99.30
Overall Width (at top) 47.00
Spinner Diameter: 14.00"
Spinner Material: Polyurethane
Spreeding Width Range: 5to 30'
System Voltage: 12 vdc
Top Screen: YES
Vibrator Included?: NO
Works With Bagged #1 Rock Salt: Yes
Works with Bulk Salt: Yes
Works with Bulk Sand: Yes
Works with Salt/Sand Mix: Yes
Drive Type: Electric
Hopper Length:(in) 84.00
Hopper Width(in): 47.00
Overall Height: 32.00"
DESCRIPTION
Buyers Products SaltDogg Electric Stainless Hopper Spreader is ready for commercial use. The 8 ft spreader can fit in the back of an extended-bed 1 ton truck and will work with bulk salt or a 50/50 salt/sand mix. Its electric-powered design means quieter operation with no need for refueling or engine servicing.
The hopper and fully-welded frame are made from long lasting, corrosion resistant 304 stainless steel. A 12 in. wide, all steel pintle chain conveyor provides high speed material flow with its independent 3/4 HP, 12V gear motor.
A lever-operated feedgate offers additional material flow control. A six-fin, 14 in. poly spinner powered by an independent 1/2 HP, 12V motor can cast material 5-30 ft. The stainless steel chute can be extended an extra 11-1/2 in. if needed.
The spreader is operated by an intuitive heavy duty in-cab controller with independent spinner and conveyor speeds. The spreader also comes outfitted with a top screen, stainless steel inverted V, and tie down kit.
Product Common Use: Residential & Commercial Spreading, Property Maintenance, Parking Lots, Driveways
DESCRIPTION
Capacity: 1.70 yd
Chute Primary Material: 304 Stainless Steel
ChuteStandardAdjustableExtended: Adjustable Height
Controller Type: High Current Variable Speed
Drive Motor Horse Power: 0.75 HP
Feed Mechanism: Conveyor chain
Feed Mechanism2: 12 in Pintle Chain Conveyor
Gearbox Ratio: 20:1
Hopper Material: 304 Stainless Steel
Number of Motors: 2
Overall Length: 99.30
Overall Width (at top) 47.00
Spinner Diameter: 14.00"
Spinner Material: Polyurethane
Spreeding Width Range: 5to 30'
System Voltage: 12 vdc
Top Screen: YES
Vibrator Included?: NO
Works With Bagged #1 Rock Salt: Yes
Works with Bulk Salt: Yes
Works with Bulk Sand: Yes
Works with Salt/Sand Mix: Yes
Drive Type: Electric
Hopper Length:(in) 84.00
Hopper Width(in): 47.00
Overall Height: 32.00"
