Buyers-SALTDOGG-1400050SS-2.0 Cubic Yard Gas Stainless Steel Hopper Spreader
SALTDOGG 1400050SS- 2.0 Cubic Yard Gas Stainless Steel Hopper Spreader
Designed for 1 ton trucks. 96 in. hopper with a 2.0 cubic yard capacity.
10-1/2 HP gas engine with convenient electric start and throttle control.
Spreads bulk salt or a salt/sand mix.
Versatile 12 in. chain conveyor drive.
12 in. poly spinner broadcasts up to 30 ft. Stainless steel construction.
Top screen and inverted V included.
Made in the USA.
Buyers Products SALTDOGG 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 8 ft hopper can fit in an extended-bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.
A SALTDOGG spreader is an investment made to last. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.The stainless steel hopper is provides superior corrosion protection. The frame is continuously welded for strength and durability. The hopper also comes outfitted with a top screen. The spreader is equipped with a steel pintle chain conveyor, and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.
Its 12 in. poly spinner casts material 2 ft to 30 ft and gets the job done. The spreader is equipped with a regular chute. Adjustable baffles allow you to adjust the spread pattern to match your use. Buyers Products 2 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.
Product Common Use: Light Commercial Jobs, Residential Units/Apartment Complexes, Driveways, Parking Lots
Chute Primary Material = 304 Stainless Steel
ChuteStandardAdjustableExtended = Standard
Controller Type = In-Cab Throttle/Choke
Discharge Position: Center
Drive Type = Gas
Hopper Length = 96.00"
Hopper Material = Stainless Steel
Spinner Material = Polyurethane
Works With Bagged #1 Rock Salt = Yes
Works With Bulk Salt = Yes
Works With Bulk Sand = Yes
Works With Salt/Sand Mix = Yes
Capacity = 2.00 yd
Overall Height = 32.10"
Overall Length = 115.70"
Overall Width (At Top) = 47.00"
Hopper Width = 47.00"
Top Screen = Yes
Drive Motor Horse Power = 10.50 HP
Vibrator Included? = No
Spinner Diameter = 12.00"
Spreading Width Range = 2 To 30 Feet
Gearbox Ratio = 20:1
System Voltage = 12 VDC
Feed Mechanism = Conveyor Chain
Feed Mechanism2 = 12 in. Pintle Chain Conveyor
HIGHLIGHT THE LINK BELOW & RIGHT CLICK ON GO TO HTTPS:
- MANUAL INSTRUCTION: https://pimimages.buyersproducts.com/products/Documents/3008005_C.pdf
- Wiring Diagram for SaltDogg Gas Spreaders: https://pimimages.buyersproducts.com/products/Documents/wiring_diagram_gas_spreader.pdf