**DEXTER AXLE PARTS ARE DELAYED 3-4 WEEKS **
Cart 0
Buyers-SALTDOGG-1400250SS-1.5 Cubic Yard Gas Stainless Steel Hopper Spreader-Extended Chute, (product_type), (product_vendor) - Nick's Truck Parts

Buyers-SALTDOGG-1400250SS-1.5 Cubic Yard Gas Stainless Steel Hopper Spreader-Extended Chute

$ 4,598.75

SALTDOGG 1400250SS- 1.5 Cubic Yard Gas Stainless Steel Hopper Spreader - Extended Chute

Designed for 3/4 ton and 1 ton trucks.
Available with a 72 in. hopper with a 1.5 cubic yard capacity.
10-1/2 HP gas engine with convenient electric start and throttle control.
Spreads bulk salt or a salt/sand mix.
Versatile 12 in. chain conveyor drive.
12 in. poly spinner broadcasts up to 30 ft, using a regular chute.
In-cab controls with independent variable speeds for the conveyor and spinner.
High quality, 304 stainless steel construction for optimum corrosion resistance.
Stainless steel inverted V improves flow and reduces stress on the drive line.
Top screen included.
Made in the USA.

Buyers Products SALTDOGG 1.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 6 ft hopper can fit in the bed of a 3/4 ton or 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.
A SALTDOGG stainless spreader is an investment made to last. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.
Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader is equipped with steel pintle chain conveyor, and features a stainless steel inverted V design to reduce stress on the drive line and improve flow. The high-flow pintle chain conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.
Its 12 in. poly spinner casts material 2 ft to 30 ft and gets the job done. The spreader is equipped a regular chute. Adjustable baffles allow you to adjust the spread pattern to match your use.

The SALTDOGG 1.5 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP. Product Common Use: Residential Spreading, Light Commercial, Driveways, Parking Lots

SPECIFICATIONS:

Chute Primary Material = 304 Stainless Steel
ChuteStandardAdjustableExtended = Extended
Controller Type = In-Cab Throttle/Choke
Drive Type = Gas
Hopper Length = 72.00"
Hopper Material = 304 Stainless Steel
Number Of Motors = 1
Spinner Material = Polyurethane
Works With Bagged #1 Rock Salt = Yes
Works With Bulk Salt = Yes
Works With Bulk Sand = Yes
Works With Salt/Sand Mix = Yes
Capacity = 1.50 yd
Overall Height = 32.10"
Overall Length = 91.70"
Overall Width (At Top) = 47.00"
Hopper Width = 47.00"
Top Screen = Yes
Drive Motor Horse Power = 10.50 HP
Vibrator Included? = No
Spinner Diameter = 12.00"
Spreading Width Range = 2 To 30 Feet
Gearbox Ratio = 20:1
System Voltage = 12 VDC
Feed Mechanism = Conveyor Chain
Feed Mechanism2 = 12 in. Pintle Chain Conveyor

 

HIGHLIGHT THE LINK BELOW & RIGHT CLICK ON GO TO HTTPS:



  • MANUAL INSTRUCTION: https://pimimages.buyersproducts.com/products/Documents/3008005_C.pdf
  • Wiring Diagram for SaltDogg Gas Spreaders: https://pimimages.buyersproducts.com/products/Documents/wiring_diagram_gas_spreader.pdf

Share this Product


More from this collection